| | | New Product Information - Q3
| | |
| | | | | |
| | | | | ETL Systems New Products - Quarter 3
| | | | |
| | | | | |
| | | 
| | |
| | |
| | |
| | | The
list below shows information on our new satcoms RF products ideal for
BROADCAST, SATELLITE OPERATORS, TELECOMS and GOVERNMENT / MILITARY
applications. Please take a look to see if there is a solution for your RF requirements. | | |
| | | | | |
| | | Switch Matrix / Router
| | | 128 x 128 IF Switch Matrix / Router - Vulcan
| - 40-200MHz IF frequency range
- Compact 16U high chassis with a capacity of 128 inputs and 128 outputs
- Typically used for larger teleports and signal monitoring for satellite communication
- Local and remote control with extensive monitoring facilities
- Resilience - dual PSU's & CPU modules, redundant paths & hot swap features
- 0-30dB variable gain to balance input signals.
Model VCN-12
| | | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | RF over Fibre IF modules with -20dB monitoring ports- StingRay series
| - 50-200MHz IF RF over fibre 200 series modules
- -20dB monitoring port to measure input signal levels.
Model SRY-TX-F2-215
& SRY-RX-F2-216 | | | | | | | |
| | | | | |
| | | 
| | RF over Fibre Outdoor unit | - Robust weatherproof (IP65 rated) enclosure
- Designed to be wall or post mounted close to the antenna
- Accommodating up to 4 Transmit or Receive 400 series StingRay Fibre modules.
Model ODU203
| | | | | | |
| |
| | | |
| | | Splitters | | |
| | | | | 4-way L-band Splitter with automatic or manual gain control – Modular System
| - 850-2350MHz L-band frequency range
- Designed to be housed in 26128 modular system chassis - holding up to 16 modules in 4U
- 0-28 dB variable gain and 0-12 dB slope compensation to balance input signal levels
- AGC mode for output level selection and MGC mode for attenuation level selection
- RF detection provides signal level monitoring.
Model 26128-DIV421
| | | | | | |
| | | | | |
| | | | | | 4-way L-band Splitter with automatic or manual gain control & LNB powering – Modular System | - As above with the integrated and selectable 13/18V LNB powering with
Model 26128-DIV450
| | | | | | | |
| | | | | |
| | | | | 8-way L-band Splitter with dual redundant amplifiers, variable gain & slope, LNB powering – Modular System
| - 850-2150MHz L-band frequency range
- Designed to be housed in 26128 modular system chassis - holding up to 8 modules in 4U
- Resilience - 1+1 dual redundant amplifiers with auto switching from main to stand-by based on current sensing
- 0-28 dB variable gain & 0-6 dB slope for signal balance
- Selectable 13/18V LNB powering with 22kHz tone.
Model 26128-DIV828
| | | | | | |
| | | | | |
| | | | | |
| | |  | Dual 4-way C-band Active Splitter
| - 3.4-4.8GHz C-band active dual 4-way splitter
- Optional signal monitoring via front panel
- Ethernet remote monitoring & unit temperature via a web browser interface.
Model D0104D1UC1A-22408
| | | | | | |
| | | | | |
| | | 
| Dual 4-way Variable Gain KU-band Active Splitter
| - 10.7-12.75GHz KU-band dual 4-way active splitter
- 0 to -15 dB variable gain
- Optional signal monitoring via front panel.
Model D0104D1UK1A-22407
| | | | | | | |
| | | | | |
| | | 
| 4-way
& 8-way Single L-band Active Splitter with 10 MHz pass, LNB
powering & optional dual redundant amplifiers & DC Pass - Dextra
Series
|
- 850-2450MHz L-band
- 10 MHz pass
- 13/18V LNB powering & 22KHz tone
- Optional features include:
- Dual redundant amplifiers
- DC pass
- Extensive remote control & monitoring facilities via a web browser interface
- Customer settable alarm thresholds for LNB current monitoring
- Front panel -20dB signal monitoring port.
Model D0104S1ULA-22450 (4-way)
Model D0108S1ULA-22483 (8-way)
| | | | | | |
| | | | | |
| | | | | |
| | |
